ATTINY26-16PU
In-System Prog. MC, 2KB-Flash, 128B EEPROM, 10-bit ADC, DIL20, RoHS
Features
• High-performance, Low-power AVR® 8-bit Microcontroller
• RISC Architecture
– 118 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
• Data and Non-volatile Program Memory
– 2K Bytes of In-System Programmable Program
Features
• High-performance, Low-power AVR® 8-bit
Microcontroller
• RISC Architecture
– 118 Powerful
Instructions – Most Single Clock Cycle Execution
– 32
x 8 General Purpose Working Registers
– Fully Static
Operation
– Up to 16 MIPS Throughput at 16 Mhz
•
Data and Non-volatile Program Memory
– 2K Bytes of In-System
Programmable Program Memory Flash
Endurance: 10,000 Write/Erase
Cycles
– 128 Bytes of In-System Programmable
EEPROM
Endurance: 100,000 Write/Erase Cycles
– 128 Bytes
Internal SRAM
– Programming Lock for Flash Program and
EEPROM Data Security
• Peripheral Features
– 8-bit
Timer/Counter with Separate Prescaler
– 8-bit High-speed
Timer with Separate Prescaler
2 High Frequency PWM Outputs with
Separate Output Compare Registers
Non-overlapping Inverted PWM
Output Pins
– Universal Serial Interface with Start
Condition Detector
– 10-bit ADC
11 Single Ended
Channels
8 Differential ADC Channels
7 Differential ADC Channel
Pairs with Programmable Gain (1x, 20x)
– On-chip Analog
Comparator
– External Interrupt
– Pin Change
Interrupt on 11 Pins
– Programmable Watchdog Timer with
Separate On-chip Oscillator
• Special Microcontroller
Features
– Low Power Idle, Noise Reduction, and Power-down
Modes
– Power-on Reset and Programmable Brown-out
Detection
– External and Internal Interrupt Sources
–
In-System Programmable via SPI Port
– Internal Calibrated RC
Oscillator
• I/O and Packages
– 20-lead PDIP/SOIC:
16 Programmable I/O Lines
– 32-lead QFN/MLF: 16 programmable
I/O Lines
• Operating Voltages
– 2.7V - 5.5V for
Attiny26L
– 4.5V - 5.5V for Attiny26
• Speed
Grades
– 0 - 8 MHz for Attiny26L
– 0 - 16 MHz for
Attiny26
• Power Consumption at 1 MHz, 3V and 25°C for
Attiny26L
– Active 16 MHz, 5V and 25°C: Typ 15 mA
–
Active 1 MHz, 3V and 25°C: 0.70 mA
– Idle Mode 1 MHz, 3V
and 25°C: 0.18 mA
– Power-down Mode: < 1 ìA
Technical Specification Summary
Hinta: 1.25 € 2.49 € (sis. ALV)
Valm. koodi: ATTINY26-16PU
Tuotekoodi: M ATTINY26-16PU
Koko: 1 Kpl /pcs
Varastossa: 7